As Electric Scooter Lights become increasingly popular in urban transportation worldwide, their safety and performance have become key concerns for consumers and manufacturers. Compared to other brands on the market, manufacturers who strive to release safer Electric Scooter Lights and ensure that all designs and features prioritize rider safety can enhance their brand value and competitiveness. When it comes to the safety of Electric Scooter Lights, the design and functionality of the lights are crucial. Proper lighting systems can significantly improve rider visibility, reducing the risk of accidents whether riding during the day or at night.
The Importance of Lighting Systems
Electric Scooter Lights have small wheels and a high center of gravity, making emergency braking on unknown road conditions dangerous due to potential tipping.
The front light of a Electric Scooter Lights need to provide better visibility and sufficient distance to spot hazards, allowing for timely braking to ensure rider safety.
The lighting system is one of the key safety features of Electric Scooter Lights, directly affecting the rider’s safety in night or low-visibility conditions. Improper light design and installation positions can result in the rider seeing others but not being seen by other road users.
Common Issues with Installation
Lights Installed Too Low:
Many Electric Scooter Lights have headlights installed low near the wheels, making it difficult for oncoming vehicles to see the lights, thereby reducing the rider’s visibility.
Poor Quality Lights:
Using low-quality LED lights may save energy but often lack sufficient brightness for adequate night-time illumination.
Incorrect Installation Angle:
Incorrect lighting angles may cause the light to shine on the ground rather than ahead, affecting the rider’s visibility.
Lighting Requirements by Regulatory Standards
U.S. Department of Transportation National Highway Traffic Safety Administration (NHTSA) FMVSS:
White Front Light: Visible from 500 feet (152.4 meters) ahead.
Red Tail Light: Visible from 600 feet (182.8 meters) behind.
Reflectors: On the front, sides, and back.
Ref: https://unagiscooters.com/scooter-articles/electric-scooter-lighting-laws/
European E-MARK:
● ECE R113 Lighting Installation Angle Requirements:
● ECE R74 Lighting Installation Height Requirements:
Optimal Electric Scooter Lights Installation Position
To enhance safety, lights on Electric Scooter Lights should install as high as possible, such as between the handlebars. This ensures that other drivers and oncoming vehicles can clearly see the rider.
Especially for high-speed Micro E-Scooters, it is advisable to choose high-brightness lights that comply with European UNECE Regulation CLASS B or CLASS C Standards, ensuring clear illumination of both near and distant areas.
Read More : E-MARK Darkbuster E10
Ensuring Sufficient Light Brightness
Brightness is a critical factor for night riding. Generally, a 5 ~ 7 watt LED headlight can emit 300 ~ 500 lumens, which is sufficient for most riding conditions. However, for high-speed riding to maintain high visibility, it is recommended to use lights with over 700 lumens.
Additionally, the lighting system should have an IP67 waterproof rating to cope with various harsh weather conditions.
Conclusion
At last, the safety of Micro E-Scooter Lights relies not only on structural design and material selection but also significantly
on the lighting system. Thus, micro E-Scooter Lights Manufacturers should emphasize the quality and installation position
of the lights to ensure rider safety in night and low-visibility conditions.
By choosing high-quality, high-brightness LED lights and installing them in the optimal position, the safety of Micro E-
Scooter Lights can be greatly enhanced, providing better protection for riders.
Read More : E-MARK Darkbuster E9-S
