Electric Motor Bike Lights E-MARK DARKBUSTER E3(L1e~L6e Class C)

  • High Standard E-mark electric motor bike lights obtained ECE R113 Class C for Lo Beam.
  • ECE R10 Vehicle EMC Certificate by passing through the strictest TUV EMC testing!
  • Darkbuster E3 are the best Versatile and Rugged Lighting Solutions on the market.
  • Wide application for L1e, L2e, L3e(A1), L4e, L5e, L6e. UP TO 11KW/125CC

 

All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.

 

Electric Motor Bike Lights E-mark DB E3 icon-4


 

High Standard E-mark electric motor bike lights with ECE R113 Class C for Lo Beam
  • Our E-mark electric motorcycles lights are quite easy to get ECE R113 Class C for Lo Beam due to our 300 lux high performance and best beam pattern.
  • Thanks for the outstanding optical design, so that our E-mark electric motor bike lights perform more lumen, less watt, less heat.
  • In addition, its powerful daytime running light function of these lights are optional.

ECE R113 C Class E-mark Electric Motor Bike Light (E3 Low Beam)

 


 

With ECE R10 Vehicle EMC Certificate
  • Mainly Electric motor bike lights in the market don’t pass E-mark ECE R10  (EMC) Approved.
  • Therefore, Electromagnetic compatibility (EMC) is the crucial but often overlooked issue by the demanders of electric motorcycles lights.
  • EMC means these lights can operate in an electric environment without interfere other electronic devices, and without being interfered by other devices.
  • Our electric motorcycles lights acquired ECE R10 Vehicle EMC Certificate by passing through the strictest TUV EMC testing!

ECE R10 Approved (EMC Compliance Test)

 

R10: https://www.unece.org/fileadmin/DAM/trans/main/wp29/wp29regs/2019/E-ECE-324-Add.9-Rev.6.pdf

Read More: https://brightstartw.com/blog/why-led-driving-light-has-to-perform-electromagnetic-compatibility-approval/

 


 

Versatile and Rugged Lighting Solutions
  • These durable aluminum housing electric motor bike lights are waterproof protection Rating IP67 and corrosion resistant.
  • The extreme temperatures will raise rapidly the failure rate of other brand electric motorcycles lights. But, ours have been designed to withstand extreme temperatures from -20℃ to +60℃.
  • Our electric motorcycles lights perform SAE J575 Standards Quality Assurance, so that they can survive under challenge condition.
  • Wide application for L1e, L2e, L3e(A1), L4e, L5e, L6e. (Up to 11KW/125CC)

Electric Motor Bike Lights DB E3 Spraying&Temperature Cycle Test-2

 


 

QUALITY ASSURANCE Based on SAE J575 Standards

S14.4.2.3 Heat Test
S14.5.1 Vibration Test
S14.6.6.3 Temperature Cycle Test
S14.6.9 Sealing Test
Salt Spraying Test(ASTM B117-73)

Electric Motor Bike Lights DARKBUSTER QUALITY ASSURANCE

DB E3 SPEC

Inside ChipOSRAM Chip / LO:12W
DRL: 3W
Color Temperature6000K±500K
Luminous Flux (Raw Lumens)LO BEAM:1200LM (300lx)
DRL:200LM
Input Voltage9-30V DC / 24-70V DC / OPTIONAL
WeatherproofIP67
HousingCNC Machined Aluminum Housing
Operating Temperature-20℃~+60℃
ApplicationsL1e / L2e / L3e(A1) / L4e / L5e / L6e

Environmental Test- EMARK ECE 113 Electric Bike Headlight Testing in Lab.

Scroll to Top